Posted on

how to make cbd vape oil from isolate

6 Steps To Make CBD Vape Juice At Home – Guide For Vapers

Smoking a joint Vs. vaping with a CBD vape juice has been a controversial talk of the town since long.

Those who love smoking always advocates the reasons to smoke a joint while on the other side vape lovers has been piling up the reasons to use vape.

Cbd Vape Juice

Interestingly, vape & other kinds of electronic cigarettes are becoming popular among youth, especially including beginners.

Disclaimer: Excessive Smoking Of Any Kind is Injurious To Health!

This article is been specifically written for the vapers and for the love of vape.

Although, many people want to smoke a joint but here we will be talking about how to prepare CBD vape juice from CBD isolate.

CBD and its derived products are one of the most demanded things these days.

Due to its extreme health benefits and ease of purchase by the governments, it is becoming a magical kind of substance.

Ingredients required to make CBD Vape Juice

Ordinary vape juice is made up of vegetable glycerin, flavourings, MCT oil and propylene glycol.

In comparison to this, CBD vape juice is also prepared with the blend of similar ingredients yet with an addition of CBD extract and a fraction of terpenes for making your vape juice aromatic.

In order to prepare a fine quality CBD vape juice, you need to fully understand each and every ingredient being used in it. So let’s have a deep look over it!

Propylene glycol

It is used as a carrier in vape juice. It is actually a kind of alcohol just like glycerin!

It is used for holding the taste of your vape and making the clouds thin and lighter.

It also acts as a preservative and facilitating the vape juice to last longer.

Vegetable glycerin

Sugar alcohol made from plant oils. Plant oils are heated at a specific range of temperatures which removes the fatty acids from the glycerin components giving an end product of a sweet and odourless gluey liquid which is actually called glycerin.

It is added in the most blends of the available vape juices because it helps making a heavy and thick smoke everyone desires for.

Having a hint of sweetness VG is considered to be the most essential ingredient of a vape juice.

MCT Oil

Used as an alternative to PG and VG.

Medium-chain triglyceride (MCT) is a fatty component derived from oils like palm and coconut.

It is an odourless and a flavourless oil used by many of the vape juice manufacturers as a carrier.

Terpenes

These are quite similar to cannabinoids!

It binds with the receptors in your brain and body in order to provide assemblage effect.

Also, terpenes are added in CBD vape juice to activate the aromatherapic feel and floating a natural flavour in the liquid.

Your Favourite

It’s eveyrone’s favourite!

Yes, the flavour. 😀

Flavour defines the probability of being choosed by a vape user.

It makes your vape more aromatic and enjoyable to make you feel good while vaping.

FDA (Food and Durg Administration) has a detailed enforcement policy over the use of vape and electronic ciggaretes. It also defines the kind of approved flavours that could be sold to the end users!

NOTE: Flavourings used in vape juices are totally non oil-based. In fact, none of the components used in vape juices are made from ordinary or essential oils as they’re really dense and are not safe to inhale.

Preparing CBD Vape Juice with CBD Isolate

Many of the CBD users are aware of the difference between CBD Isolate Vs. Full Spectrum CBD.

But, for those who don’t know. The one liner defenition of CBD isolate is “it is the purest for of CBD“.

Pure Cbd Isolate

So without wasting any bit of time, let’s dive into the recipe for prearping vape juice with a CBD isolate.

Here is the list of key ingredients you’ll be needing to prepare 30ml of CBD vape juice.

  • Propylene glycol (15 ml)
  • Your favourite flavouring or terpenes (3 ml)
  • Vegetable glycerin (12 ml)
  • CBD isolate extract (500 mg)
  • Digital scale
  • An empty vape juice container
  • Syringe

Now since we have noted down the list of ingredients for prearping CBD vape juice ourselves. Here’s a step by step guide for preparing the vape juice!

Step 1: With the help of syringe add 15ml of propylene glycol in the empty vape juice container.

Step 2: Measure 0.5gm i.e. 500mg of CBD isolate extract and add it into the vape juice container holding the 15ml of propylene glycol.

You should know that how much is too much. So here’s a guide over the CBD dosage for your ease!

Step 3: Gently shake the container for making a solvent of CBD isolate and PG until it is fully dissolved and make sure that no solid particles are visible in the container.

Step 4: Now using the syringe, add 12ml of vegetable glycerin into your mixture and again shake it gently to make it a blend of all three.

Step 5: Add your favourite flavourings in a limited amount of 3ml.

Step 6: Now you are ready to fill up your vape tank and smoke. 🙂

Just make sure that you put the remaining vape juice in refrigrator or any cool dry place in order to make it last longer.

You might be thinking that how much this thing can last?

You genuinely need not to worry about this because in most cases a CBD vape juice can last for like 18-24 months and if stored gently, it may last upto even for 5 years.

So in order to increase the shelf life of the juice, it is more receommended to store it in a cool dark place.

And if you feel a change in consistency of the liquid and change in the taste then be assured that your vape juice has been expired! :p

Now you know how to prepare you own. Just make sure to use the best quality ingrediets to get the best results!

If you like our content then hit the share icon and let your vapers gang know the easiest way to prepare CBD vape juice at their homes.

And don’t forget to subscribe our newsletter to get the latest update right away in your mail inbox. Cheers! 😀

Learn about CBD vape juice for vapers. CBD gummies and CBS juice are favorite for vapors. Enjoy your joint and vape juice. Its a fantasy for everyone.

How to Make Vape Juice from CBD Isolate in 6 Easy Steps

Do you want to make vape juice from CBD isolate? If YES, here are 5 basic ingredients you need to make vape juice from CBD isolate and how to do it quickly. Note that in some states with recreational laws on marijuana use, it is easier to find vape juice produced from cannabis. In these states, you can also purchase pure CBD isolates, which means there are no other cannabinoids in the mix.

Table of Content

What is Vape Juice?

Vape juice, sometimes referred to as CBD e-liquid (or simply CBD vape oil), is a general term use to describe a CBD oil made for use with a vaporizer. People call pre-filled cannabis CBD oil cartridges e-liquid, CBD vape juice, or CBD e-juice.

However, unlike pure CBD oils that you find in a bottle, vape juices are usually made with propylene glycol (PG) or vegetable glycerine (VG) – thinning agents that make the “juice” liquid enough to work with the heater coils found on a vape pen.

What is CBD Isolate?

CBD isolate is the purest form of CBD in its concentrated form. It is primarily a CBD extract from hemp plants with all the plant components, including oils, waxes, terpenes, chlorophyll and other cannabinoids filtered out. What you have left is a fine, white powder that contains 99+% pure CBD.

However, to isolate CBD, the extraction process is expected to be followed thoroughly. Note that what this process does is to remove all the plant material from the extract and leave you with pure CBD. Full – spectrum CBD gotten from hemp contains 0.03% THC, which itself is a negligible amount and does not make the CBD psychoactive by any means.

Hence, CBD isolate contains absolutely no THC, making it the preferred option for those who want the effects of CBD without a trace of THC getting in their system. Simply put vaping CBD will provide you with the benefits of hemp without getting you “high”.

CBD isolate can be bought from many different places. Always be sure you are getting your CBD products from a trustworthy source to ensure that it is of the highest quality. Making your own vape liquid with CBD isolate is easier than you think. If you have the proper ingredients and some tools, you are good to go.

5 Ingredients Needed to Make Vape Juice from CBD Isolate

Note that you can make a regular vape juice (without nicotine) with just a few ingredients: a carrier such as vegetable glycerine, propylene glycol, or MCT oil and flavourings. Below is a breakdown of each ingredient so you can get a better understanding of what is actually in your vape juice.

1. Vegetable glycerine

Vegetable glycerine (VG) is better known as a sugar alcohol made from plant oils. This ingredient is made by heating up plant oils under pressure, which then separates the fatty acid components from the glycerol portion. As an end product, it produces a sweet, odourless, viscous liquid known as glycerine.

Have it in mind that most vape juices today contain vegetable glycerine as the major ingredient because it allows vaporizers to produce the thick smoke most people desire. It also comes with a hint of sweetness to it, although it is not enough to be a sweetener by itself.

Also note that vegetable glycerine has less of a throat hit, which may or may not appeal to some vape users. A “throat hit” is known as the harsh or scratchy feeling you get when inhaling smoke. There are some people who crave this feeling while vaping because it gives them the smoking sensation. But if the throat hit is not particularly important to you, then vegetable glycerine might be ideal because it is highly hypoallergenic and therefore suits most vape users.

2. Propylene glycol

This alcohol is more or less similar to vegetable glycerine because you can use it as a carrier for the vape juice. A lot of vape juice in the United States contain just vegetable glycerine, just propylene glycol, or a mixture of both. Note that the key characteristics of propylene glycol are that it holds on to flavour much better and gives a better throat hit, but the vapours are thinner than those from VG. The result is a smaller or thinner vape cloud which tastes great.

The PG is that similar VG, which is why the two are sometimes used together to get the best of both worlds. In addition, PG functions as a preservative, which helps to increase the life of the vape juice. Nonetheless, some people find that they are allergic to propylene glycol, so that is something you should be cautious about when trying out PG products. Swollen gums, sore or dry throat, sinus problems, and rashes are signs of an allergic reaction to PG.

3. MCT Oil

The acronym MCT simply stands for medium – chain triglyceride, and this carrier is mostly used as an alternative to PG and VG. Triglyceride is a technical name for fats. These are fats that gotten from foods such as coconut oil or palm kernel oil.

The majority of vape juice manufacturers use MCT oil that comes from coconuts. This oil is an extremely concentrated source of medium – chain triglycerides. This oil is produced through a man – made process called fractionation. The resulting MCT oil is odourless and flavourless which is why it makes a great carrier for vape juices.

4. Terpenes

Terpenes are natural aromas and flavour which producers derive from various plants (including hemp). According to reports, there are approximately 20,000 different terpenes existing with over 100 of them coming from hemp. Note that terpenes are not only ideal for adding flavour to vape juice but they also possess beneficial properties. Just like cannabinoids, terpenes can bind to receptors in the brain and body to stimulate effects. This essentially is the science of aromatherapy.

Note that when you add terpenes to a vape juice they help to supply the body with the “entourage effect”. It simply means when the CBD and terpenes work “synergistically” to achieve a combining effect greater than any single ingredient would provide. Some vape juice producers use terpenes to add natural flavour back into the product.

5. Flavourings

According to industry data, there is said to be over 7,000 different vape flavours out there. Some of these are natural flavours and some are artificial. Note that the flavourings used in vape juice are non-oil based food-grade flavourings. It simply means the FDA approved the flavour for consumption but that leaves a lack of efficient research towards inhalation purposes.

These flavourings are derived from either a natural source (food or plant) or are artificially made by humans. Nonetheless, regular oil or essential oils should never be a component of any of the ingredients in vape juice because it is not safe to inhale and can cause lipid pneumonia.

How to Make Vape Juice from CBD Isolate in 6 Steps

For the sake of this article, we will be describing the ingredients and procedures needed to make a 30 ml vape juice from CBD isolate. The ingredients you will need include: 500 mg CBD isolate (≥99% pure), 15 ml propylene glycol, 12 ml vegetable glycerine, 3ml flavouring of choice (vape juice flavouring or terpenes), Blunt tip syringe, Double or triple – digit scale (reads 0.01/0.001), and a 30 or 60 ml empty vape juice container.

1. Pour propylene glycol into a clean, empty container

With the syringe, carefully measure out and add 15 ml of propylene glycol into the empty vape juice container. To get better flavour retention and throat hit, you can use a higher ratio of PG to VG, such as 70/30. For thicker smoke, you can flip the ratio and use more VG.

2. Add CBD isolate to the beaker

Carefully measure out 500 mg (0.5 grams) of CBD isolate. Also carefully add the isolate powder to the container holding 15 ml PG. Put the cap on the glass container holding the PG and CBD isolate mixture.

3. Mix propylene glycol and CBD isolate together

At this point, shake the container vigorously until the CBD isolate has fully dissolved into the PG. Note that it may take a minute of shaking or longer to fully dissolve the solution. The mix should be a consistent liquid form with no crystal portions left.

4. Add vegetable glycerine

Still using the blunt syringe, carefully measure out and add 12 ml of vegetable glycerine into the mixture. This is a crucial component of vape juice that gives it the thick smoke. Ensure to mix it in well as some of it can stick to the sides of the container. Make sure you mix the components thoroughly until you unify the solution.

5. Add flavourings

Have it in mind that this is the most important part of the vaping experience: the flavour. You can choose any flavour of your liking and carefully add 3ml of it into the solution you have created. Give it some time to let the flavour mix in thoroughly with the rest of the solution.

6. Package and Store your solution

Immediately you are done with the steps above, the only thing left to do is transfer your newly made vape juice into your vape tank and store the rest. The best place to store it is either in the refrigerator or a cool, dark space, as this will extend the life of your CBD vape juice.

Conclusion

Making your own vape juice with CBD isolate is easier than you think. If you have the ingredients and the tools mentioned above, then you are good to go. However, when making vape juice from CBD isolate, always ensure to use the best ingredients because you don’t want to be inhaling something you should not.

Do you want to make vape juice from CBD isolate? If YES, here are 5 basic ingredients you need to make vape juice from CBD isolate and how to do it quickly