What Is The Best Way To Extract CBD From Hemp?
Keep reading to find out how to extract CBD, and which method produces the highest-quality CBD oil. While they all harness the power of CBD, they don’t all achieve the same degree of purity.
Why does CBD extraction matter?
To produce CBD oils, cosmetics or supplements, you must first extract the cannabinoid from raw plant material. Fortunately, the most abundant source of CBD is hemp, a selectively bred crop used extensively in dozens of commercial industries.
Although there are many ways to extract CBD from hemp, some methods are much more efficient and safer than others. It’s essential to know the difference, since how you extract CBD affects the purity and efficacy of the final product.
What are the options for extracting CBD?
Below, you will find a breakdown of some of the most common extraction techniques used, including their main pros and cons.
Solventless CBD extraction (by hand)
How does one make CBD extracts without using a solvent? Simply enough, you just have to apply heat, pressure, or a bit of friction to hemp flowers and leaves. How do you do that, you wonder? Well, if you freeze hemp flowers, you can shake the small trichomes loose and gather them together. These trichomes, as you might know, contain the full spectrum of cannabinoids and terpenes found in the hemp plant.
Pros of solventless extraction
• No additional equipment needed
• Makes use of the whole hemp plant
• Cheapest method of extraction
Cons of solventless extraction
• Yields are low and impractical
• No way of controlling purity, with minimal levels of CBD
• CBD extract contains plant material and unwanted cannabinoids
Olive oil CBD extraction
First, to perform olive oil extraction at home, you need to make sure your plant material is decarboxylated. In short, that means it undergoes the process of acidic cannabinoids being activated via heat. That, of course, happens when you smoke or vape it, but it can also happen if you put it in the oven.
Once decarboxylated, mix your plant matter with olive oil and heat it on the stove for several hours. CBD, other cannabinoids and essential terpenes will bind to the fats in the oil, creating an infused product. Finally, the mixture is left to cool before being filtered to remove any leftover plant material.
Pros of olive oil extraction
• Can be performed easily at home
• Relatively safe, with no previous extraction experience needed
• Greater degree of purity compared to solventless extraction
Cons of olive oil extraction
• Little control over the final extract
• Weak and unreliable CBD content compared to more professional methods
• Not suitable for commercial sale
Basic solvent CBD extraction
Solvent extraction is a rudimentary and risky practice, but it has fans. Essentially, it involves running a liquid solvent through decarboxylated hemp to remove cannabinoids and terpenes. The usual solvents include butane, ethanol, and hexane, so you need to safely evaporate any residual solvent post-extraction to ensure usable CBD extract.
Pros of solvent extraction
• Cheap and requires relatively small amounts of equipment
• Solvent CBD extracts have a respectable degree of purity
• Easy to scale for commercial production
Cons of solvent extraction
• Working with solvents can cause injury if not used correctly, they are highly flammable
• The oil can remain contaminated with solvent, which is dangerous for the end-user
• Higher temperatures risk destroying some essential terpenes and other smaller compounds
Supercritical CO₂ CBD extraction
In this method, CO₂ is manipulated to enter a supercritical state. With characteristics of both a gas and a liquid, it’s pumped through raw plant material under controlled conditions, stripping away essential terpenes and cannabinoids without damaging them.
Pros of supercritical CO₂ extraction
• Allows for the extraction of clean and safe concentrates without the use of additional additives or contaminants.
• Offers highly efficient yields, getting the most out of the hemp plant.
• CO₂ extraction is sustainable and environmentally friendly
Cons of supercritical CO₂ extraction
• Co₂ extraction is an industrial process, making it highly expensive
• Requires expertise to perform correctly
Which CBD extraction method is the best?
CO₂ extraction has significant advantages over other methods of producing CBD oil. First, you can pump supercritical CO₂ through hemp in such a way that it selectively picks up the cannabinoids and other compounds, leaving everything else behind.
Second, since it uses CO₂, it produces CBD oils free from chemicals and contaminants. And, when the extraction process is over, you can either reuse the CO₂ or release it safely back into the atmosphere. Thanks to this outstanding level of control, supercritical CO₂ has become a leading tool extraction and one that Cibdol uses to create all of its CBD extracts.
However, highly sophisticated extraction is only the beginning. Cibdol goes above and beyond for its customers, publishing a detailed analysis of every CBD product batch. Performed by an independent third-party, these analyses indicate levels of all common cannabinoids, allowing you to make the most informed decision possible.
You can browse the complete selection of our third-party tested CBD products from the Cibdol store, including CBD oils, cosmetics, supplements and isolates. Or, discover more about independent testing and what its means using our beginner-friendly CBD Encyclopedia.
If you want to learn more about extracting CBD, including which methods produces the highest-quality CBD oils, and which methods you should avoid.
Cbd oil processing
What Are the Most Popular CBD Extraction Methods?
CBD has exploded in popularity over the last couple of years and, while most people are familiar with the term and may have even sampled a few CBD-containing products, it’s rare that the average consumer knows the intricate details of the process used to create them. At Pharmstrong™, the entire process from seed to final product fascinates us – especially the extraction methods, as the various techniques used greatly affect the quality, taste, and potency of the final product. We believe it’s worth sharing tidbits about the most popular extraction methods on the market today because knowing this information is not only interesting, but helps the consumer make an educated decision when it comes to selecting the right CBD provider for their needs. Therefore, let’s take a closer look at some of the most popular extraction methods and a few advantages and disadvantages of each.
Quick Review of the Basics
Before diving into the specific extraction methods, it’s helpful to review a few simple, yet important, frequently asked questions about CBD in general:
What is it and where does it come from?
CBD is a cannabinoid, a chemical compound extracted from hemp plants.
Is it legal?
Yes! However it must be hemp-derived and contain .3% or less THC to be legal according to the 2018 Farm Bill. If you purchase a hemp-derived CBD product from a reputable company, who is transparent about the source of their products and provides lab results verifying the levels (or in many cases, the complete absence) of THC, you have nothing to worry about.
What are some common uses of CBD?
This unique and powerful compound is very versatile, making it the perfect addition to many products. CBD is commonly added to carrier oils – such as organic olive oil or MCT oil – to create fast-acting oral drops (which go under the tongue), mixed with beeswax and essential oils for soothing topical balms, or broken down into tiny nanoparticles for incorporation into easy-to-swallow, highly bioavailable softgel capsules. CBD is also commonly used in vaping products and added to gummy candies and energy drink mixes.
Popular CBD Extraction Methods
In order to make beneficial and highly-effective products, the CBD must first be carefully extracted and preserved from the hemp plant. Maintaining the quality and purity of the main ingredient is essential to creating a premium CBD product.
There are several methods for extracting CBD from the hemp plant, and even a few DIY versions (which we don’t recommend). But let’s take a look at several of the most common extraction methods:
Extraction by Solvent:
With this method, a solvent – commonly food grade ethanol, or a hydrocarbon like butane or propane – is soaked or washed over plant trimmings, drawing out the desirable compounds. In the case of hydrocarbon extraction, the resulting mixture, which now contains the cannabinoids and other useful compounds such as terpenes, is then further refined (the refinement method depends on the desired end product) and the majority of the solvent is removed. From there, a final purging of any remaining solvent is done, leaving a concentrated CBD oil. With ethanol extraction, the resulting liquid is then distilled to separate the hemp oil from the food grade ethanol and further isolate the desired compounds.
Pros: The process is efficient, fairly inexpensive, and does not require as specialized equipment as other methods. Solvents are superior at locking onto and drawing out the desirable compounds. Hydrocarbons, in particular, are known for preserving the plant’s flavor and aroma well.
Cons: Due to the flammable nature of the solvents, this method can be dangerous under certain circumstances. And, if not meticulously executed, residual solvent may potentially be left in the final product. Additionally, certain solvents – particularly ethanol – may extract undesirable compounds (like chlorophyll) as well, giving the final product a bitter or unpleasant taste.
Olive Oil Extraction:
“Natural solvents”, like olive oil, are used as well for the extraction of CBD – not commercially, but rather by CBD/cannabis aficionados. The raw hemp is heated to a specific temperature (decarboxylated) and then added to the oil and heated again to extract the cannabinoids. The olive oil does not evaporate like ethanol or hydrocarbon solvents, so the final product will not be as concentrated and is more of a CBD-infused oil instead of a concentrated extract.
Pros: Inexpensive and easy to do in your own home and eliminates concerns over residual solvents, expensive equipment, and safety.
Cons: The final product is more perishable (compared to commercial products) and most likely will not taste as pleasant. Additionally, since this method is much less precise than others, the resulting CBD-infused oil mixture will be less concentrated than a CBD extract. Therefore, the consumer will have to consume a larger dosage.
This popular, tried and true method for extracting essential oils can be used to extract cannabinoids as well. Steam is used to free the volatile compounds (cannabinoids in this instance) from the raw plant material. The resulting vapor, full of the desirable compounds, is then cooled and condensed. The resulting oil and water are then separated.
Pros: Inexpensive, straightforward, and a solvent-free method.
Cons: Inefficient, requires more plant material for less oil, and produces inconsistent concentrations of CBD. Also, this method has the potential to damage the chemical properties of some heat sensitive cannabinoids/compounds.
In this method, CO2 (which stands for carbon dioxide) is used to pull cannabinoids and other desirable compounds from the harvested hemp plants. This scientifically advanced, yet fascinating process generally involves three chambers. In the first chamber, CO2 – which is in a gaseous state under normal circumstances – is converted to a liquid state by increasing the pressure and significantly decreasing the temperature. Next, the temperature and pressure are slowly increased until the liquid CO2 reaches a “supercritical” point. This is the neat part. At this point, the CO2 is somewhere between a liquid state and a gaseous state and retains some of the properties of each; it expands like a gas, but is more concentrated like a liquid. Once in this optimal state, the CO2 is pumped into the second chamber, which holds the hemp plant material. The CO2 then passes through the hemp, separating the oil (rich in cannabinoids and other beneficial compounds) from the plant material. The oil and CO2 then make their way to the third and final chamber where the two separate and the residual CO2 simply evaporates. What’s left is a highly concentrated CBD oil extract.
Pros: An extremely precise, solvent free method that is safe (no flammable solvents) and environmentally-friendly (uses less energy and plant material).
Cons: It’s a highly sophisticated, scientific process and, therefore, uses very advanced and expensive equipment.
Everyone has their own preferences when it comes to the products they use and the methods used to create them. But, we can probably all agree on one thing: a minimally processed and expertly crafted product, sourced from simple, quality ingredients is the best choice when it comes to products in the health and wellness category – CBD included. At Pharmstrong™, we create all of our scientifically-formulated Pure + Potent products with that commitment to quality and purity in mind, and we can promise that our safe, proprietary, and precisely executed extraction and purification process isolates all of the desirable compounds our customers want, and excludes those that they don’t. We would be honored to chat with you more in person in our Breckenridge, CO store, over the phone, or via email at any time to answer any remaining questions you may have about the extraction method we use, CBD in general, or one of our premium grade products.
We create all of our scientifically-formulated Pure + Potent products with a commitment to quality and purity in mind. Call us today to learn more.